Use and maintenance of pipeline conveyor belt

Pipeline transportation is widely used in various industries due to its simple structure, convenient operation and strong transportation capacity. In industrial production, if the belt of the assembly line is properly maintained and maintained, the service life of the assembly line can be extended, thereby effectively reducing production costs.

1. With the popularization of assembly lines in industrial production, multiple varieties, high performance, light weight, multi-function, and long life are the aspects that manufacturers pay attention to. The following items should be noted in the use of the conveyor belt of the assembly line:

1. Avoid the roller covered by the material, causing the rotation to fail, prevent the leakage of material from being caught between the roller and the tape, pay attention to the lubrication of the moving part of the conveyor belt, but do not oil the conveyor belt;

2. Prevent the pipeline load from starting;

3. If the conveyor belt deviates, it should take timely measures to correct it;

4. When it is found that the conveyor belt is partially damaged, it should be repaired in time to avoid expansion;

5. Avoid conveying belts from being blocked by racks, pillars or massive materials, and preventing them from being broken.

conveyor

Second, in industrial production, saving production costs is the key, so it is necessary to properly maintain the conveyor belt, which can effectively extend the service life of the assembly line.

1. The conveyor belt should be kept clean during transportation and storage to avoid direct sunlight or rain and snow, prevent contact with acids, alkalis, oils, organic solvents and other substances, and one meter away from the heating device.

2. The storage temperature of the conveyor belt should be kept between 18-40 ℃, and the relative humidity should be kept between 50-80%.

3. During storage of the conveyor belt, the product must be placed in rolls without folding, and the conveyor belt should be turned once a quarter.

4. Conveyor belts of different types and specifications should not be used together. The joints are glued.

5. The type, structure, specifications and number of layers of the conveyor belt should be selected according to the conditions of use.

6. The running speed of the conveyor belt should generally not be greater than 2.5m/s. The materials with large block size and large abrasion and the unloading device using fixed pears should use low speed as much as possible.

7. The feeding direction should follow the running direction of the conveyor belt. In order to reduce the impact of the material on the conveyor belt, a chute should be used to reduce the distance of the material. For material leakage, the conveyor belt should adopt a soft and moderate baffle plate to prevent the baffle plate from being too hard and scratching the belt surface of the conveyor belt.