Conveyor belt joint classification

All conveyors must be connected in a loop before use. In this way, the quality of the conveyor belt joint directly affects the durability of the belt and the smooth operation of the conveyor process. The general methods of conveyor belt joints include three types, which are mechanical joints, cold bonded joints, hot vulcanized joints and so on.

Mechanical joint method

Generally speaking, this refers to the use of belt conveyor conveyor belt joints, this joint method is convenient and economical, but the joint efficiency is low and easy to damage, it has a certain impact on the service life of conveyor belt products. PVC and PVG flame retardants and antistatic conveyor belts are located between the common joints of conveyor belts below grade 8.

Cold head method

The cold head method is that the joint adopts cold bonding adhesive. This joint method is more effective and more economical than the mechanical joint of the roll roller. It should have a better joint effect, but from reality, because the process conditions are more difficult Master, it has a great impact on the quality of the mixture, so the impact on the joint is not very stable.

Thermal vulcanization seam method

Practice has proved that the thermal vulcanization seam method is an ideal joint method, which not only ensures the high efficiency of the joint, but also ensures the stability of the joint, long life and easy operation, but has the disadvantages of cumbersome process, high cost, and long connection time.